Design & Components_inova automatic gates and sliding gates uk

Home About Us News Products Project Gallery Gate Guide Gate Safety Clients Contact Us

INOVA Gates Components

Extremely quiet in operation Reducing noise levels is a way of

protecting the environment, so that's

why INOVA gates run particularly quiet. This is achieved by the extensive use of the roller bearings in polymer guide rollers. The results are

outstanding, the gates opening and

closing cycles are practically silent.

Gate Guide

Quality & Innovation

Control System

Warranty, Hand-Over & Maintenance Agreement

Inovamatic microprocessor control

Protected from the elements, the electronic controls are cleverly enclosed with a purpose made section of the guide column.

This lockable section of the column can be easily opened and closed when maintenance or adjustments are necessary.

Height - adjustable roller support

Where conventional gates require two rolling wheel supports, the INOVA gate needs only one - the drive unit acts as the second support.

This results in significant material and cost savings.

Intelligent control system for accident prevention

To minimise the risk of accidents or damage to property or persons, the INOVA gates stop automatically whenever they come across obstructions or are subjected to resistance. To do this, there are five contact strips fitted on the gate itself and on the guide column.

Inova Gates Design - Drive Units

Depending on the width of your entrance, you can choose between different gate types and designs as detailed below;

With a maximum opening width of 16 m per gate, when 2 no. Inova sliding gates are installed opposite each other, opening widths of up to 32m are possible.

Inova sliding gates can be installed quickly, easily and cheaply as the gates are supplied fully pre-assembled. The drive unit and safety devices are ready for use when they are delivered, only the foundation work and pre-cabling is necessary. There is a tensioning element in the design of the gate to provide the necessary tensioning and allow for later adjustments.

Emergency operation even in a power cut

To ensure that the sliding gate can continue to be operated smoothly even in a power cut, the gear unit on the INOVA sliding gates can easily be set to manual operation, so that the gate can be simply opened and closed by hand.

Electrical drive fitted in the lower beam

The electrical drive unit on the INOVA gates are fitted in the lower beam, invisible from the outside and protected from tampering and the weather elements, yet easily accessible for maintenance. An AC-powered worm gear unit provides direct power transmission to the gate.